Roundabout

Movement within a roundabout in right-hand traffic; note the anticlockwise circulation

Movement within a roundabout in left-hand traffic; note the clockwise circulation

A roundabout, a rotary and a traffic circle are types of circular intersection or junction in which road traffic is permitted to flow in one direction around a central island, and priority is typically given to traffic already in the junction.^[1][2]

In the USA, engineers use the term modern roundabout to refer to junctions installed after 1960 that incorporate various design rules to increase safety.^[3][2] Compared to stop signs, traffic signals, and earlier forms of roundabouts, modern roundabouts reduce the likelihood and severity of collisions greatly by reducing traffic speeds and minimizing T-bone and head-on collisions.^[4] Variations on the basic concept include integration with tram or train lines, two-way flow, higher speeds and many others.

For pedestrians, traffic exiting the roundabout comes from one direction, instead of three, simplifying the pedestrian's visual environment. Traffic moves slowly enough to allow visual engagement with pedestrians, encouraging deference towards them. Other benefits include reduced driver confusion associated with perpendicular junctions^{[citation needed]} and reduced queuing associated with traffic lights. They allow U-turns within the normal flow of traffic, which often are not possible at other forms of junction. Moreover, since vehicles that run on gasoline typically spend less time idling at roundabouts than at signalled intersections, using a roundabout potentially leads to less pollution.^[5][6] When entering vehicles only need to give way, they do not always perform a full stop; as a result, by keeping a part of their momentum, the engine will require less work to regain the initial speed, resulting in lower emissions. Research has also shown that slow-moving traffic in roundabouts makes less noise than traffic that must stop and start, speed up and brake.^[7]

Modern roundabouts were first standardised in the UK in 1966 and were found to be a significant improvement over previous traffic circles and rotaries. Since then, modern roundabouts have become commonplace throughout the world,^[2]: 2 including Australia, the United Kingdom and France.^[6]