ISA-88

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article may be in need of reorganization to comply with Wikipedia's layout guidelines. Please help by editing the article to make improvements to the overall structure. (December 2017) (Learn how and when to remove this message) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "ISA-88" – news · newspapers · books · scholar · JSTOR (December 2017) (Learn how and when to remove this message) (Learn how and when to remove this message)

Part of a series of articles on
Machine industry
Manufacturing methods
Batch production Job production Flow production Lean manufacturing Agile manufacturing
Industrial technologies
PLM RCM TPM VDM QRM TOC Six Sigma TQM ZD
Information and communication
ISA-88 ISA-95 ERP IEC 62264 B2MML
Process control
PLC DCS SCADA
v t e

S88, shorthand for ANSI/ISA88, is a standard addressing batch process control. It is a design philosophy for describing equipment and procedures. It is not a standard for software and is equally applicable to manual processes. It was approved by the ISA in 1995 and updated in 2010. Its original version was adopted by the IEC in 1997 as IEC 61512-1.

The current parts of the S88 standard include:

• Models and terminology
• Data structures and guidelines for languages
• General and site recipe models and representation
• Batch Production Records
• Machine and Unit States: An Implementation Example of ISA-88^[1]

S88 provides a consistent set of standards and terminology for batch control and defines the physical model, procedures, and recipes. The standard sought to address the following problems: lack of a universal model for batch control, difficulty in communicating user requirement, integration among batch automation suppliers, and difficulty in batch-control configuration.

The standard defines a process model that consists of a process that consists of an ordered set of process stages that consist of an ordered set of process operations that consist of an ordered set of process actions.

The physical model begins with the enterprise, which may contain a site, which may contain areas, which may contain process cells, which must contain a unit, which may contain equipment modules, which may contain control modules. Some of these levels may be excluded, but not the Unit.

The procedural control model consists of recipe procedures, which consist of an ordered set of unit procedures, which consist of an ordered set of operations, which consist of an ordered set of phases. Some of these levels may be excluded.

Recipes can have the following types: general, site, master, control. The contents of the recipe include: header, formula, equipment requirements, procedure, and other information required to make the recipe.