Iron sights

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Iron sights" – news · newspapers · books · scholar · JSTOR (January 2012) (Learn how and when to remove this message)

Iron sights are a system of physical alignment markers used as a sighting device to assist the accurate aiming of ranged weapons such as firearms, airguns, crossbows, and bows, or less commonly as a primitive finder sight for optical telescopes. Iron sights, which are typically made of metal, are the earliest and simplest type of sighting device. Since iron sights neither magnify nor illuminate the target, they rely completely on the viewer's naked eye and the available light by which the target is visible. In this respect, iron sights are distinctly different from optical sight designs that employ optical manipulation or active illumination, such as telescopic sights, reflector (reflex) sights, holographic sights, and laser sights.^[1]

Iron sights are typically composed of two components mounted perpendicularly above the weapon's bore axis: a 'rear sight' nearer (or 'proximal') to the shooter's eye, and a 'front sight' farther forward (or 'distal') near the muzzle. During aiming, the shooter aligns their line of sight past a gap at the center of the rear sight and towards the top edge of the front sight. When the shooter's line of sight, the iron sights, and target are all aligned, a 'line of aim' that points straight at the target has been created.

Front sights vary in design but are often a small post, bead, ramp, or ring. There are two main types of rear iron sight: 'open sights', which use an unenclosed notch, and 'aperture sights', which use a circular hole. Nearly all handguns, as well as most civilian, hunting, and police long guns, feature open sights. By contrast, many military service rifles employ aperture sights.

The earliest and simplest iron sights were fixed and could not be easily adjusted. Many modern iron sights are designed to be adjustable for sighting in firearms by adjusting the sights for elevation or windage.^[2] On many firearms it is the rear sight that is adjustable.

For precision shooting applications such as varminting or sniping, the iron sights are usually replaced by a telescopic sight. Iron sights may still be fitted alongside other sighting devices (or in the case of some models of optics, incorporated integrally) for back-up usage, if the primary sights are damaged or lost.